Three globes of pressed ripple glass, ∅ 20 cm (7.9″) each — hung as a staggered round cluster or level along a 60 cm (23.6″) brass bar. Every cord adjusts at its holder after the fixture is up, and the three E26 holders take bulbs you can buy anywhere. Made for a kitchen island, dining table or stairwell.
What makes it work
-
Pressed ripple glass — the dimpled surface scatters the light instead of passing it straight through, so the glare of a bare bulb never reaches the table.
-
Two ways to hang it — a black steel disc canopy, ∅ 40 cm (15.7″), staggers the three drops over a table or a corner; a 60 cm (23.6″) polished brass bar hangs them level along an island or a run of counter.
-
Cord adjustable at every holder — set the drop and the stagger once it is up, and change it again later without touching the wiring.
Four glass colourways
-
Pink — soft and warm, and quiet in a bedroom or a smaller dining room.
-
Green — earthy, and sits well against wood and planting.
-
Gray — the most neutral of the four, and lets the ripple do the talking.
-
Red — the loudest, and a deliberate focal point over an island or a table.
Before you order
Bulbs are not included: the three holders take a standard E26 base, and a clear filament lamp shows the ripple best. The fixture is hardwired — no plug, no switch on the cord — and is not built for a dimmer, so run it from an ordinary switch. Rated IP20, it belongs in dry indoor rooms: not a bathroom, not a covered porch.
Installation
It hangs from a single ceiling point and wires into the mains, with the canopy covering the connection. Fix into a joist or a rated ceiling anchor rather than plasterboard alone, and over a dining table set the globes 75–90 cm (30–35″) above the tabletop. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Available sizes
| Layout |
Canopy |
Drop |
Globes |
| Round |
Black steel disc, ∅ 40 cm (15.7″) |
Staggered, to 110 cm (43.3″) |
3 × ∅ 20 cm (7.9″) |
| Long |
Polished brass bar, 60 cm (23.6″) |
Level, to 120 cm (47.2″) |
3 × ∅ 20 cm (7.9″) |

Specifications
| Materials |
Ripple glass globes, steel canopy, brass holders |
| Globe |
∅ 20 cm (7.9″), three per fixture |
| Canopy |
Round steel disc ∅ 40 cm (15.7″) or polished brass bar 60 cm (23.6″) |
| Socket |
3 × E26 (bulbs not included) |
| Drop |
Adjustable, to 110 cm (43.3″) round or 120 cm (47.2″) long |
| Cord |
Black fabric-covered, adjustable at each holder |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| Mounting |
Ceiling, single point |
| Dimmable |
No |
| IP rating |
IP20 — dry indoor use only |
| Assembly |
Required — canopy, cords and globes fit together before wiring in |
Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Are bulbs included?
No. Each of the three holders takes a standard E26 bulb, sold separately.
What is the difference between Round and Long?
Round hangs the globes from a black steel disc canopy, ∅ 40 cm (15.7″), at staggered lengths dropping to 110 cm (43.3″). Long spreads them evenly along a polished brass bar of 60 cm (23.6″), dropping to 120 cm (47.2″).
Can I shorten the cords?
Yes. Each globe hangs on its own fabric cord and adjusts at the holder, so you can set the drop and the stagger after the fixture is up.
Can it go in a bathroom?
No. It is rated IP20, for dry indoor rooms only.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.