Candeeiro de mesa Cocoon, cúpula branca, haste cónica em aço, candeeiro de cabeceira
€148,00
Preço em promoção €148,00Preço normal
IVA incluído, envio gratuito e devoluções fáceis
ARRIVES IN França WITHIN OCT 30–NOV 4
Descrição
A lamp with a spherical white cocoon shade over a steel frame, set on a tapered steel stem. It takes an E26 or E27 bulb, LED or Edison, and gives a warm, diffused light. The shade is white in every version.
Choose the size, 21 x 31 cm or 33 x 58 cm, the base in black or white, and the plug type. It suits bedsides, shelves and home offices.
Especificações do produto
Dimensions, 21 x 31 cm
∅21 cm × H 31 cm (8.3″ × H 12.2″)
Dimensions, 33 x 58 cm
∅33 cm × H 58 cm (13″ × H 22.8″)
Material
Cocoon, steel
Light source
LED bulb or Edison bulb
Bulb base
E26 or E27
Voltage
AC 110–240 V
Control
Inline on/off push-button switch
Cable
150 cm (59.1″)
Lamp base finishes
Black, white
Shade finish
White
Best for
Bedside tables, living-room shelves, home offices and entryways where soft ambient light and sculptural form matter equally
Guia de instalação
These lamps are free-standing and need no wiring. Most are ready to use within a few minutes of unpacking. The steps below cover mains, rechargeable and solar models - check which one you have in the Product Specifications above before you begin.
Before you start
Placement: put the lamp on a flat, stable surface, away from doorways and walkways where it can be knocked. Floor lamps want their base clear of rugs that could rock them.
Power: your lamp runs from a mains plug, a built-in rechargeable battery, or a solar panel. The Product Specifications above say which.
Indoors or out: only use a lamp outside if its rating allows it. Keep any lamp that is not rated for damp away from sinks, baths and open windows.
Dimming: some models have a switch or touch control that dims; others work with a plug-in dimmer. The specification above states what your model offers.
Bulbs: where a bulb is replaceable, use the type and wattage listed. Never exceed the wattage printed on the socket.
Tools you may need
None for most models
A small screwdriver, if your lamp has a battery cover or a shade to attach
An extension lead, if the nearest socket is some distance away
Setting up
1. Unpack and check
Take the lamp out carefully and keep the packaging until you are satisfied with it. Check for damage in transit and that every part listed is present. Where a shade or base ships separately, fit it by hand or with a small screwdriver - hand-tight is enough.
2. Choose the position
Stand the lamp on a level surface that will take its weight without flexing. For a reading lamp, the bottom of the shade sitting a little above eye level when you are seated puts the light on the page and keeps the bulb out of view.
3. Connect the power
Mains: plug it into a nearby socket and route the cable so it is not stretched or walked on. Outdoors, use a weatherproof socket or an outdoor-rated extension.
Rechargeable: charge it fully before first use. The battery compartment is usually under the base. Fit the specified battery type the right way round and close the cover.
Solar: stand the panel in direct sun. The first full charge can take a day of good daylight, and performance in the first days is not a fair test of the battery.
4. Fit or check the bulb
If your lamp takes a replaceable bulb, screw it in gently until it seats. Do not force it. Integrated LED models have no bulb to fit and are not designed to be opened.
5. Switch on and adjust
Use the switch, touch control or remote to turn the lamp on, then set the brightness or colour mode if your model offers them. Motion-activated and solar models may not behave predictably until they have completed a full charge cycle.
Important tips
Follow the safety notes printed on the lamp and in its manual.
Do not use an indoor-only lamp outdoors, even under cover.
Recharge or replace batteries before they run flat repeatedly - deep discharge shortens battery life.
Wipe a solar panel clean from time to time; a dusty panel charges noticeably more slowly.
Unplug a mains lamp during a thunderstorm or if you are away for a long period.
Keep the cable of a floor lamp behind the furniture rather than across the floor, and leave a little slack where it enters the base so the joint is never under tension.
If anything about setting the lamp up is unclear, email info@clerachic.com and a person will answer you.
Porque vai adorar
White resin cocoon shade — warm, diffused light for shelves, desks and nightstands
Steel frame and tapered stem — a slim, sculptural line under the shade
Two sizes, 31 cm or 58 cm tall — one for a shelf, one with more presence
Inline push-button switch on the cord — easy to reach without moving the lamp
Quanto custa o envio?
Envio gratuito para França em todas as encomendas, sem valor mínimo.
Cada peça é feita por encomenda, por isso aguarde entre 7 e 12 dias úteis no total.
Encomende hoje e pode esperar recebê-lo entre 3 November e 10 November.
E se não estiver correto?
Tem 30 dias para o devolver. Se não estiver certo, é fácil devolvê-lo.
Precisa de ajuda?
Estamos a apenas um e-mail de distância, em info@clerachic.com — pessoas reais, antes e depois da sua compra.
Opções de pagamento
Métodos de pagamento
Fácil de ver
Um brilho suave e acolhedor que mantém o ambiente tranquilo — nunca intenso nem clínico.
Feito para durar
Materiais de qualidade, criteriosamente selecionados, e um design pensado para durar anos.
Envio gratuito, sempre
Envio gratuito para França em todas as encomendas, sem valor mínimo.
30 dias para decidir
Experimente primeiro. Se não for o ideal, devolva-o no prazo de 30 dias — sem complicações.
Também poderá gostar de...
Criado para inspirar. Construído para durar.
Cada peça é escolhida à mão pela qualidade, funcionalidade e pelos pequenos detalhes que a maioria das marcas ignora. Se não a quiséssemos para nós, não lha venderíamos — e todas as encomendas incluem envio gratuito e 30 dias para mudar de ideias.
Tem perguntas antes de comprar? Somos pessoas reais, a um e-mail de distância em info@clerachic.com.