Kaareva seinävalaisin sängyn vierelle, akryylinen häikäisysuoja

An iron frame with the LED sealed behind acrylic, giving a soft bar of light with no visible source and nothing to replace. Slender vertical rods gather around the glowing diffuser, so what you see on the wall is a tall geometric composition with real architectural presence — a sculptural object when it is off, and a warm band of even light when it is on. It draws the eye upward and gives a flat wall the height and detail it was missing.

Everything is built from high-quality iron and acrylic, resistant to corrosion and scratching, with a smooth back face that sits flush against the plaster without marking it. The acrylic diffuser hides the LED completely, which is why the light arrives soft and diffused rather than as a hard point you have to look away from. Black suits a graphic, contemporary room; Gold warms the wall around it and works beautifully in a more eclectic interior. Either way, it is the kind of fixture that looks considered in a living room, a bedroom, a hallway or an entrance area, and that carries a lobby wall just as easily.

Two profiles are offered. Style A is 8 cm (3.1″) wide and 50 cm (19.7″) tall, with left-facing and right-facing versions so you can flank a bed, a doorway or a mirror symmetrically — and you can order a matched pair in Black, in Gold, or in a Black and Gold combination. Style B is 10 cm (3.9″) wide and 47 cm (18.5″) tall in Gold, available singly or as a pair. Each lamp weighs 1 kg (2.2 lb), draws 4 W for 440 lm, and mounts on a compact 8 cm (3.1″) by 10 cm (3.9″) canopy that keeps the installation tidy.

Three light modes let the mood shift with the hour: warm white at 3000 K, natural white at 4000 K and cool white at 6000 K. The LED is integrated and rated for 50,000 hours, so once it is up you are unlikely to touch it again. It runs on AC 90–260 V for steady, even output in any market and carries UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA and VDE certification. If you want it dimmable, email info@clerachic.com before you order and we will arrange it.

Fitting is simple: fix the bracket supplied to the wall, join the wires to your mains supply with the power off and the usual care, then restore the circuit. The lamp is hardwired, so no cable trails down the wall.

Free shipping on every order. Easy returns within 30 days.

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

• Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
• Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
• Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
• Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
• Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

• Screwdriver
• Voltage tester
• Wire nuts or terminal connectors (supplied with hardwired models)
• Drill and a bit suited to your wall, if you are making a new fixing point
• Spirit level and pencil

If your light is hardwired

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

• Live to live: black, brown, or the terminal marked L
• Neutral to neutral: white, blue, or the terminal marked N
• Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

• Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
• Check the outlet box is sound and can carry the weight of the fitting before you mount it.
• Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
• Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.