ベッドサイド用ファブリックシェード壁付けライト、無垢材、34 cm

Beech and ash turned into a slim arm, with a fabric shade at the end. The wood keeps the warmth in the light before it reaches the wall. Walk past it at night and what you get is a low, kind pool of light rather than a bright spot in your eyes: the fabric takes the glare out, and the grain beside it does the rest.

Corridors, stairwells and bedrooms are exactly where overhead lighting is at its worst, all ceiling glare and hard shadows on the treads. A lamp at shoulder height fixes that. It shows you the way without waking anyone, and it puts the brightness where you are actually looking instead of high above your head.

The build is minimal with a vintage turn to it, a postmodern piece that gets its interest from materiality rather than ornament: solid beech and ash, cut slim, carrying a classic fabric shade that softens and spreads the light. Take it plain in cream, beige, light pink or sage green, or pleated in white, yellow or tea pink, where the folds catch a shadow of their own. The subdued tones and the two shade textures exist so the lamp can settle into a calm, inviting interior rather than interrupt one. Fashionable, warm and lively all at once, and refined enough to hold its place in a considered scheme.

It measures 34 cm (13.4″) across and 30 cm (11.8″) high, and it stands 20 cm (7.9″) off the wall, close enough for a narrow hallway. Weight is 1.3 kg (2.8 lb). The bulb is included and replaceable, 1 × E14, 15 W and around 1500 lm in warm white (3000 K), with an LED life of roughly 50,000 hours and a working range of AC 90 to 260 V for steady, even output.

Two ways to fit it. Take the plugged version and choose the plug that matches your sockets: EU, US, UK or AU. Or take it unplugged and wire it in permanently, screwing the supplied bracket to the wall and joining the leads to your mains feed, which is careful work and best done by someone who knows their way around a wall box. The canopy measures ∅10 cm (3.9″). Certified to UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA and VDE. Dimming can be arranged before dispatch: write to info@clerachic.com.

Free shipping on every order. Easy returns within 30 days.

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

• Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
• Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
• Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
• Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
• Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

• Screwdriver
• Voltage tester
• Wire nuts or terminal connectors (supplied with hardwired models)
• Drill and a bit suited to your wall, if you are making a new fixing point
• Spirit level and pencil

If your light is hardwired

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

• Live to live: black, brown, or the terminal marked L
• Neutral to neutral: white, blue, or the terminal marked N
• Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

• Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
• Check the outlet box is sound and can carry the weight of the fitting before you mount it.
• Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
• Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.